exmediawiki - Benutzerbeiträge [de]

Machines and Technologies @our labs

2026-06-02T10:43:10Z

Christopher.theophanous: /* Printing Technologies */

=== CNC ===
* [[lasercutter@lab|Lasercutter]]
* [[CNC Machine @khm workshop|Milling machine]]
* [[3D printer@lab|3D Printer]]
* [[Software_%C3%9Cbersicht | CNC software]]<br>
* [[Snapmaker@lab|Snapmaker]]
<br>
<br>

=== Printing Technologies ===
* [[risograph@lab|Risograph EZ571E]]<br>
* [[Miscreen@lab|Miscreen A4]]
* Linocut
* some book binding tools
* [[wire binding machine | Wire binding machine]]
* [[tips-tools zines | Tips and tools for zines, bookbinding]] tbc
<br>
<br>

=== Textile Technologies ===
* [[Tufting | Tufting]]<br>
* sewing machine
<br>
<br>

=== Electronics and tools===
* [[soldering@lab|soldering station]]<br>
* DC lab power supply<br>
* oscilloscope<br>
* Arduino<br>
* tool corner & storage<br>
** general tools<br>
** drilling<br>
** cutting<br>

<br>
<br>

=== Other Technologies ===
* lathe<br>
* [[clay kiln@lab | working with ceramics]]<br>
* [[moulding | moulding]]<br>
* [[paper_making | Papierschöpfen, paper making]]

<br>
<br>
=== Useful Links/ Boxmakers ===
some first links for templates eg of boxes and boxmaker editors online

* '''editor makercase'''<br> for simple boxes with flat, finger and t-slot joints. for round boxes. for boxes with dividers:<br> https://en.makercase.com/#/

* '''editor boxes.py'''<br> for basic boxes and joints, but much more. an editor to create templates especially for working with the lasercutter. in german and english:<br> https://www.festi.info/boxes.py/?language=en

* '''viking box generator'''<br> for a box with special joints for assembling and re-assembling a container eg for raspi wedge connectors, no glue needed:<br> https://imagio.dk/boxmaker/

* '''templatemaker'''<br> useful for basic formats, boxes, polygonal things in general. for creating and downloading custom sized (mostly) papercraft and packaging templates. also for folding templates:<br> https://www.templatemaker.nl/de/

* '''raster web'''<br> blog for a lot of diy technologies full of links and informations. the tag boxmaker is somewhat older, but still useful. with some instructions and more links:<br> https://rasterweb.net/raster/tag/boxmaker/

* '''Online box generators'''<br> easy online generators, just for boxes:<br>
** https://boxdesigner.connectionlab.org/
** https://makeabox.io/
** https://jeromeleary.com/laser/

* '''box designer'''<br> somehow helpful in customizing your own box, but not such a clear layout:<br> http://boxdesigner.frag-den-spatz.de/

<br>
<br>
<br>

[[Category:Seminar]]
[[Category:Material]]
[[Category:Print]]
[[Category:DIY]]
[[Category:ExMedia Lab]]
[[Category:Machines]]
[[Category:HowTo]]

Machines and Technologies @our labs

2026-06-02T10:42:22Z

Christopher.theophanous: /* CNC */

=== CNC ===
* [[lasercutter@lab|Lasercutter]]
* [[CNC Machine @khm workshop|Milling machine]]
* [[3D printer@lab|3D Printer]]
* [[Software_%C3%9Cbersicht | CNC software]]<br>
* [[Snapmaker@lab|Snapmaker]]
<br>
<br>

=== Printing Technologies ===
* [[risograph@lab|Risograph EZ571E]]<br>
* [[Miscreen@lab|Miscreen A4]]
* Silkscreen (only for people with silk screen experiences: t-shirt-kit can be used with ready-made/ finished screens)
* Linocut
* some book binding tools
* [[wire binding machine | Wire binding machine]]
* [[tips-tools zines | Tips and tools for zines, bookbinding]] tbc
<br>
<br>

=== Textile Technologies ===
* [[Tufting | Tufting]]<br>
* sewing machine
<br>
<br>

=== Electronics and tools===
* [[soldering@lab|soldering station]]<br>
* DC lab power supply<br>
* oscilloscope<br>
* Arduino<br>
* tool corner & storage<br>
** general tools<br>
** drilling<br>
** cutting<br>

<br>
<br>

=== Other Technologies ===
* lathe<br>
* [[clay kiln@lab | working with ceramics]]<br>
* [[moulding | moulding]]<br>
* [[paper_making | Papierschöpfen, paper making]]

<br>
<br>
=== Useful Links/ Boxmakers ===
some first links for templates eg of boxes and boxmaker editors online

* '''editor makercase'''<br> for simple boxes with flat, finger and t-slot joints. for round boxes. for boxes with dividers:<br> https://en.makercase.com/#/

* '''editor boxes.py'''<br> for basic boxes and joints, but much more. an editor to create templates especially for working with the lasercutter. in german and english:<br> https://www.festi.info/boxes.py/?language=en

* '''viking box generator'''<br> for a box with special joints for assembling and re-assembling a container eg for raspi wedge connectors, no glue needed:<br> https://imagio.dk/boxmaker/

* '''templatemaker'''<br> useful for basic formats, boxes, polygonal things in general. for creating and downloading custom sized (mostly) papercraft and packaging templates. also for folding templates:<br> https://www.templatemaker.nl/de/

* '''raster web'''<br> blog for a lot of diy technologies full of links and informations. the tag boxmaker is somewhat older, but still useful. with some instructions and more links:<br> https://rasterweb.net/raster/tag/boxmaker/

* '''Online box generators'''<br> easy online generators, just for boxes:<br>
** https://boxdesigner.connectionlab.org/
** https://makeabox.io/
** https://jeromeleary.com/laser/

* '''box designer'''<br> somehow helpful in customizing your own box, but not such a clear layout:<br> http://boxdesigner.frag-den-spatz.de/

<br>
<br>
<br>

[[Category:Seminar]]
[[Category:Material]]
[[Category:Print]]
[[Category:DIY]]
[[Category:ExMedia Lab]]
[[Category:Machines]]
[[Category:HowTo]]

CNC Machine @lab

2026-06-02T10:41:40Z

Christopher.theophanous: Christopher.theophanous verschob die Seite CNC Machine @lab nach CNC Machine @khm workshop

#WEITERLEITUNG [[CNC Machine @khm workshop]]

CNC Machine @khm workshop

2026-06-02T10:41:40Z

Christopher.theophanous: Christopher.theophanous verschob die Seite CNC Machine @lab nach CNC Machine @khm workshop

overview page [[Machines_and_Technologies_@our_labs | machines and technologies@our labs]]<br>
<br>

== CNC Machines@khm workshop ==
* main machine in the workshop, ground floor<br>
* hand guided milling machine "shaper origin", workshop, ground floor<br>

contact: Axel Autschbach, Sepp Liebisch
<br>

=== Materialien ===
Die Materialien, welche sich gut mit der Fräse bearbeiten lassen sind
*Holz
*Acryl, generell viele verschiedene Kunststoffe
*Schaumstoffe
*Aluminium, z.b. AlMgsi0,5
*Stahl
Je nach verwendetem Materiel sind unterschiedliche Frässtrategien sinnvoll, welche zusammen mit der Auswahl des passenden Fräsers dann ein gutes Ergebnis hervorbringen.

== Programme ==
[[Software Übersicht]]

== Benutzung ==

[[Category:Machines]]
[[Category:Material]]

CNC Machine @khm workshop

2026-06-02T10:39:37Z

Christopher.theophanous:

RISO Quickstart Guide

2026-06-02T10:36:48Z

Christopher.theophanous: /* Step 6: */

__NOTOC__
This Quickstart Guide is only intended to cover the steps necessary to operate the printer itself. For in-depth tutorials on how to prepare the files for printing, please refer to [[Risograph@lab]], find more information online and/or have a look at our [[Book corner @exMedia-Lab]], where you'll not only find useful literature on the topic but some examples as well.
<br>
==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”. Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>

==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
> Page Setup (Acrobat) or > Properties > Page Attributes (Foxit).
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking > Printer > Printer Options (Acrobat) or > Properties > Printer Options (Foxit). Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-02T10:36:35Z

Christopher.theophanous: /* Step 1: */

__NOTOC__
This Quickstart Guide is only intended to cover the steps necessary to operate the printer itself. For in-depth tutorials on how to prepare the files for printing, please refer to [[Risograph@lab]], find more information online and/or have a look at our [[Book corner @exMedia-Lab]], where you'll not only find useful literature on the topic but some examples as well.
<br>
==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”. Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>

==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
> Page Setup (Acrobat) or > Properties > Page Attributes (Foxit).
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking > Printer > Printer Options (Acrobat) or ''> Properties > Printer Options (Foxit)''. Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-02T10:36:18Z

Christopher.theophanous: /* Step 6: */

__NOTOC__
This Quickstart Guide is only intended to cover the steps necessary to operate the printer itself. For in-depth tutorials on how to prepare the files for printing, please refer to [[Risograph@lab]], find more information online and/or have a look at our [[Book corner @exMedia-Lab]], where you'll not only find useful literature on the topic but some examples as well.
<br>
==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
> Page Setup (Acrobat) or > Properties > Page Attributes (Foxit).
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking > Printer > Printer Options (Acrobat) or ''> Properties > Printer Options (Foxit)''. Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-02T10:35:39Z

Christopher.theophanous: /* Step 6: */

__NOTOC__
This Quickstart Guide is only intended to cover the steps necessary to operate the printer itself. For in-depth tutorials on how to prepare the files for printing, please refer to [[Risograph@lab]], find more information online and/or have a look at our [[Book corner @exMedia-Lab]], where you'll not only find useful literature on the topic but some examples as well.
<br>
==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
> Page Setup (Acrobat) or > Properties > Page Attributes (Foxit).
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking > Printer > Printer Options (Acrobat) or '''> Properties > Printer Options (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-02T10:35:07Z

Christopher.theophanous: /* Step 5: */

__NOTOC__
This Quickstart Guide is only intended to cover the steps necessary to operate the printer itself. For in-depth tutorials on how to prepare the files for printing, please refer to [[Risograph@lab]], find more information online and/or have a look at our [[Book corner @exMedia-Lab]], where you'll not only find useful literature on the topic but some examples as well.
<br>
==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
> Page Setup (Acrobat) or > Properties > Page Attributes (Foxit).
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking '''>Printer>Printer Options (Acrobat)''' or '''>Properties>Printer Options (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-02T10:33:57Z

Christopher.theophanous:

__NOTOC__
This Quickstart Guide is only intended to cover the steps necessary to operate the printer itself. For in-depth tutorials on how to prepare the files for printing, please refer to [[Risograph@lab]], find more information online and/or have a look at our [[Book corner @exMedia-Lab]], where you'll not only find useful literature on the topic but some examples as well.
<br>
==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
'''>Page Setup (Acrobat)''' or '''>Properties>Page Attributes (Foxit)'''.
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking '''>Printer>Printer Options (Acrobat)''' or '''>Properties>Printer Options (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-01T09:07:19Z

Christopher.theophanous:

__NOTOC__
==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
'''>Page Setup (Acrobat)''' or '''>Properties>Page Attributes (Foxit)'''.
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking '''>Printer>Printer Options (Acrobat)''' or '''>Properties>Printer Options (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-01T09:06:53Z

Christopher.theophanous:

_NOTOC_
==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
'''>Page Setup (Acrobat)''' or '''>Properties>Page Attributes (Foxit)'''.
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking '''>Printer>Printer Options (Acrobat)''' or '''>Properties>Printer Options (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-01T09:06:05Z

Christopher.theophanous: /* Step 6: */

==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
'''>Page Setup (Acrobat)''' or '''>Properties>Page Attributes (Foxit)'''.
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking '''>Printer>Printer Options (Acrobat)''' or '''>Properties>Printer Options (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>

==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-01T09:05:40Z

Christopher.theophanous: /* Step 5: */

==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
'''>Page Setup (Acrobat)''' or '''>Properties>Page Attributes (Foxit)'''.
<br>
<br>

==== Step 6: ====
Find the custom RISO settings by clicking '''>“Printer”>“Printer Options” (Acrobat)''' or '''>“Properties”>“Printer Options” (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>
==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-01T09:04:46Z

Christopher.theophanous:

==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Printer_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
'''>“Page Setup” (Acrobat)''' or '''>“Properties”>“Page Attributes” (Foxit)'''.
<br>
<br>
==== Step 6: ====
Find the custom RISO settings by clicking '''>“Printer”>“Printer Options” (Acrobat)''' or '''>“Properties”>“Printer Options” (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>
==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-01T09:03:55Z

Christopher.theophanous:

==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).
<br>
<br>
==== Step 4: ====
In the print tab, choose the RISO from the dropdown.
<br>
[[Datei:Rrinter_Setup.jpg|336px]]
<br>
<br>
==== Step 5: ====
Choose the right paper size and orientation from either:<br>
'''>“Page Setup” (Acrobat)''' or '''>“Properties”>“Page Attributes” (Foxit)'''.
<br>
<br>
==== Step 6: ====
Find the custom RISO settings by clicking '''>“Printer”>“Printer Options” (Acrobat)''' or '''>“Properties”>“Printer Options” (Foxit)'''. Make changes if necessary. Klick print.
<br>
<br>
==== Step 7: ====
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.
<br>
[[Datei:Screen_Riso_1.jpg|336px]]&ensp;[[Datei:Screen_Riso_2.jpg|336px]]
<br>
<br>

RISO Quickstart Guide

2026-06-01T08:59:23Z

Christopher.theophanous:

==== Step 1: ====
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
<br>
[[Datei:Riso_Button.jpg|189px]]&ensp;[[Datei:Riso_open.jpg|336px]]
<br>
<br>
==== Step 2: ====
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.
<br>
[[Datei:Riso_open_door.jpg|189px]]&ensp;[[Datei:Riso_Cartridge.jpg|189px]]&ensp;[[Datei:Riso_without_Cartridge.jpg|189px]]
<br>
==== Step 3 (file set-up): ====
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).

Step 4:
In the print tab, choose the RISO from the dropdown.

Step 5:
Choose the right paper size and orientation from “Page Setup” (Acrobat) or >“Properties”>“Page Attributes” (Foxit).

Step 6:
Find the custom RISO settings by clicking >“Printer”>“Printer Options” (Acrobat) or “Properties”>“Printer Options” (Foxit). Make changes if necessary. Klick print.

Step 7:
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.

RISO Quickstart Guide

2026-06-01T08:44:12Z

Christopher.theophanous:

Step 1:
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.
[[Datei:Riso_Button.jpg|mini]][[Datei:Riso_open.jpg|mini]]

Step 2:
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.

Step 3 (file set-up):
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).

Step 4:
In the print tab, choose the RISO from the dropdown.

Step 5:
Choose the right paper size and orientation from “Page Setup” (Acrobat) or >“Properties”>“Page Attributes” (Foxit).

Step 6:
Find the custom RISO settings by clicking >“Printer”>“Printer Options” (Acrobat) or “Properties”>“Printer Options” (Foxit). Make changes if necessary. Klick print.

Step 7:
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.

Datei:Screen Riso 2.jpg

2026-06-01T08:42:57Z

Christopher.theophanous:

Datei:Screen Riso 1.jpg

2026-06-01T08:42:45Z

Christopher.theophanous:

Datei:Printer Setup.jpg

2026-06-01T08:42:33Z

Christopher.theophanous:

Datei:Riso without Cartridge.jpg

2026-06-01T08:42:17Z

Christopher.theophanous:

Datei:Riso Cartridge.jpg

2026-06-01T08:42:04Z

Christopher.theophanous:

Datei:Riso open door.jpg

2026-06-01T08:41:44Z

Christopher.theophanous:

Datei:Riso open.jpg

2026-06-01T08:41:25Z

Christopher.theophanous:

Datei:Riso Button.jpg

2026-06-01T08:41:10Z

Christopher.theophanous:

RISO Quickstart Guide

2026-06-01T08:35:47Z

Christopher.theophanous: Die Seite wurde neu angelegt: „Step 1: Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder. Step 2: Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed. Step 3 (file set-up): Open file…“

Step 1:
Turn on the RISO machine (Passcode: 1914). Select “MasterMake”.Open tray and feeder. Put paper into the feeder.

Step 2:
Insert desired cartridge. To do so, open the door, grab the cartridge that’s inside by the handle and pull out. Lift out of the machine and insert desired cartridge. Slide back in and be sure to properly close the door. Potential error messages will indicate if the door is not fully closed.

Step 3 (file set-up):
Open file either in Acrobat (log in with your individual Adobe license provided by khm) or just use Foxit (free pdf reader). Go to print (Command + P).

Step 4:
In the print tab, choose the RISO from the dropdown.

Step 5:
Choose the right paper size and orientation from “Page Setup” (Acrobat) or >“Properties”>“Page Attributes” (Foxit).

Step 6:
Find the custom RISO settings by clicking >“Printer”>“Printer Options” (Acrobat) or “Properties”>“Printer Options” (Foxit). Make changes if necessary. Klick print.

Step 7:
Back at the machine, click pause. With the print job selected, click output. The machine will start making the master and print two sheets. From there on, use the keypad to set the quantity and print.

Benutzer:Christopher.theophanous

2026-06-01T08:28:36Z

Christopher.theophanous:

[[testpage]]

[[RISO Quickstart Guide]]

Main Page

2026-05-28T13:07:30Z

Christopher.theophanous: /* Resources */

{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<center><tagcloud>exclude=GNU/Linux,Command_Line,FLOSS,Dateilinks,Name,Links,Seiten_mit_defekten_Dateilinks,Seiten_mit_ignorierten_Anzeigetiteln,Imported_vocabulary,GNU_Linux,Hilfe:Bearbeiten,Hilfe:Artikel</tagcloud></center>

==Resources==

----

<big>'''[[Machines and Technologies @our labs | Machines and Technologies @our labs]]'''</big>
----
<big>'''[[Unreal Club | Unreal Club]]'''</big>
----
<big>'''[[CG Lab | CG Lab]]'''</big>
----
<br>
<br>
<big>'''[[public workspaces @exMedia-Lab | public workspaces @exMedia-Lab]]'''</big>
----
<big>'''[[book corner @exMedia-Lab | book corner @exMedia-Lab]]'''</big>
----
<br>
<br>

== Current seminars/ lectures at exMedia Lab==

----
<big>'''Winter 2025/26'''</big>
* [[OpenLab 25-26| Open Lab 25-26]], Karin Lingnau. Every Wednesday, 2-4 pm.
* [[Hands on BioMedia-26| Hands on BioMedia]], Dr. Klaus Herbst. Compact Seminar, 09.-13. February 2026
* [[Tool of Tools| Tool of Tools]], two Workshops. Camilo Sandoval, Workshop 1: 19.01., Workshop 2: 23./26.01.2026
* [[Selfpublishing Compact Seminar | Selfpublishing als poetische Praxis: DIY-kompakt]], Mara Genschel, Karin Lingnau. Compact Seminar, 02.-06. February 2026
----
<br>
<br>

==Research focus==

----
<big>'''[[Material & Materiality]]'''</big>
----
<big>'''[[Biologische Medien| Working with Biotechnical Media]]'''</big>

----
<big>'''[[Programmieren als künstlerische Praxis]]'''</big>
----

<big>'''[[Künstliche Intelligenzen]]'''</big>
----
<br>

==Archive==

----
<div class="row">
<div class="large-4 columns">
<big>'''Open Lab'''</big>
* [[Open_Lab_all | Open Lab all]], starting in 2019, ongoing<br>
</div>

</div>
----
<div class="row">
<div class="large-4 columns">
</div>
<div class="large-4 columns">
<big>'''Summer 2025'''</big>
* [[Material&Process-25 | Material & Process 25]] (Karin Lingnau, Dawid Liftinger, Camilo Sandoval)
* [[OpenLab 25| Open Lab 25]] (Karin Lingnau)
* [[Summertime with Biomedia| Summertime with Biomedia]] (Dr. Klaus Herbst)
* [[Worldbuilding | Worldbuilding]] (Karin Lingnau, Melissa de Raaf)
* [https://exmedia.khm.de/science-kitchen-food-futures/ Science Kitchen], Food Futures, talk by Björn Theis on June 30th, 2025 — 19:00
</div>
</div>
----
<div class="row">
<div class="large-4 columns">
<big>'''Wintersemester 2024/25'''</big>
* [[OpenLab-24-25| Open Lab 24-25]] (Karin Lingnau, Klaus Herbst)<br>
* [[worldbuilding| Worldbuilding: Science Fiction. Utopia & Dystopia. Ecofiction. Biopolitics.
Alternate Histories. ]] (Melissa de Raaf, Karin Lingnau)<br>
* [[Hands-On-Biomedia-24-25| Hands-On-Biomedia 24-25]] (Dr. Klaus Herbst)<br>
</div>

<div class="large-4 columns">
<big>'''Sommersemester 24'''</big>
* [[OpenLab-24| Open Lab 24]] (Verena Friedrich, Karin Lingnau, Klaus Herbst)
* [[Material&Process-24 | Material & Process 24]] (Karin Lingnau, Dawid Liftinger, Camilo Sandoval)
* [[RisoFandom| Riso Workshop, Fandom]] (Isa Conrady, Karin Lingnau)
* [[Papier-Papier | Wir machen was Schönes mit Papier]] (Karin Lingnau, Tina Tonagel)
* [[Keramion-Project | Welcome to the Jungle, Keramion Project]] (Jung Saeyun, Karin Lingnau)
</div>

<div class="large-4 columns">
<big>'''Wintersemester 2023/24'''</big>
* [[OpenLab-23-24| Open Lab 23-24]] (Verena Friedrich, Karin Lingnau, Klaus Herbst)
* [[Klang-Bild-Maschinen| Klang-Bild-Maschinen]] (hans w. koch, Isabel Herguera, Karin Lingnau, Tania de León Yong, Tina Tonagel, Tobias Hartmann, Zil Lilas)
</div>
</div>
----
<div class="row">
<div class="large-4 columns">
<big>'''Sommersemester 23'''</big>
* [[OpenLab-23| Open Lab 23]] (Friedrich, Lingnau, Hen)
* Compact seminar, 12-17 June 2023: [https://exmedia.khm.de/small-realities-part-2/ Second part] of "small realities", exchange project with Accademia delle Belle Arti di Napoli and Vilnius Dailés Akademija. (Koch, Lilas, Hartman, Hen, Lingnau)
</div>

<div class="large-4 columns">
<big>'''Wintersemester 2022/23'''</big>
* [[Material & Prozess_WS22_23 | Material & Prozess]] (Lingnau, Hen)
* [[Circuit Training | Circuit Training]] (Friedrich)
* [[Hands-On Biomedia, WS22_23]] (Herbst, Friedrich)
* Excursion, February 2023: [https://exmedia.khm.de/small-realities-part-1/ First part] of "small realities", exchange project with Accademia delle Belle Arti di Napoli and Vilnius Dailés Akademija. (Koch, Lilas, Hartman, Hen, Lingnau)
* [https://ground-zero.khm.de/portfolio/?vp_filter=portfolio_category%3Aseminars Lehrveranstaltungen ground zero, siehe hier]
</div>

<div class="large-4 columns">
<big>'''Sommersemester 2022'''</big>
* [[Own_your_plastic | own your plastic]] (Lingnau, Autschbach, Liebisch)
* Welcome to the Phytotron (Friedrich, Fritze)
* Beginnlosigkeit (Hen, Stephan)
* How to program a racist AI (Trogemann, Heck, Liu)
* Artistic Research — in the wild (Trogemann)
* Die Poetik des Machens (Trogemann)
</div>
</div>
----
<div class="row">
<div class="large-4 columns">
<big>'''Wintersemester 2021/22'''</big>
* [[Open_Lab_–_Kompaktseminare | Open Lab – Kompaktseminare]] (Friedrich, Lingnau, Hen, Fritze)
* [[Material_immaterialities | Material Immaterialities]] (Lingnau, Eckhardt, Haberer)
* Human Machine Readable - Einführung in die Programmierung (Trogemann, Heck, Kuhn)
* “The Policeman's Beard is Half Constructed” - Computergenerierte Literatur (Trogemann, Heck)
</div>

<div class="large-4 columns">
<big>'''Sommersemester 2021'''</big>
* [[Open_Lab#Open_Lab_Sommer_2021 | Open Lab]] (Friedrich, Lingnau, Hen)
* Biotext (Trogemann, Heck, Kuhn)
* [[KHM_@_Cityleaks | KHM@Cityleaks]] (Hartmann, Lingnau, Schweder)
* Do Keep Ponds Clean Or Frogs Get Sick (Friedrich, Fritze)
</div>

<div class="large-4 columns">
<big>'''Wintersemester 2020/21'''</big>
* Codichte - Experimente mit kognitiven Systemen (Trogemann, Heck, Kuhn)
* [[Material_%26_Prozess | GS Material & Prozess]] (Lingnau)
* [[Open_Lab#Open_Lab_WS_2020.2F21 | Open Lab WS 20-21]] (Friedrich, Hen, Lingnau)
* Beginnlosigkeit (Hen, Stephan)
* Low End Theory Club (Hen, Stephan)
* Do Keep Ponds Clean Or Frogs Get Sick (Friedrich, Fritze)
* Einführung in die Programmierung von Textgeneratoren (Trogemann, Heck, Kuhn)
</div>
</div>
----
<div class="row">
<div class="large-4 columns">
<big>'''Sommersemester 2020'''</big>
* Distributed Technologies & Ideologies Research and Reading Group (Hopkins, Friedrich)
* [[M&M_summer2020 | Material & Materiality]], research group, summer 2020 (Lingnau)
</div>

<div class="large-4 columns">
<big>'''Wintersemester 2019/20'''</big>
* Future Minds - Kritik Künstlicher Intelligenzen (Trogemann, Heck)
* Beginnlosigkeit (Hen, Stephan)
* [[Open_Lab#Open_Lab_WS_2019.2F20 | Open Lab]] (Friedrich, Heck, Hen, Lingnau)
* [[Whole_Earth_Reading_Group | Whole Earth Reading Group]] (Friedrich u.a.)
* Einführung in die Programmierung Künstlicher Intelligenzen (Trogemann, Heck)
* Science Kitchen (Lingnau, Friedrich)
* [[Kinetic_Stage | Kinetic Stage]] (Herguera, de Leon, Lingnau)
</div>

<div class="large-4 columns">
<big>'''Sommersemester 2019'''</big>
* Kunst & KI (Trogemann)
* [[Open_Lab_SS_2019 | Open Lab]] (Friedrich, Heck, Hen)
* Blockchain Reading Group (Mi You, Hopkins, Friedrich)
* [[Material_und_Prozess | Material und Prozess]], GS (Lingnau)
</div>
</div>
----
<div class="row">
<div class="large-4 columns">
<big>'''Wintersemester 2018/19'''</big>
* Einführung in die Programmierung künstlicher Intelligenzen (Trogemann, Heck)
* Re-Cycle? (Friedrich)
</div>

<div class="large-4 columns">
<big>'''Sommersemester 2018'''</big>
* Material & Algorithmus (Faubel, Heck)
* Postgraduales Kolloquium exMedia Sommer2018
</div>

<div class="large-4 columns">
<big>'''Wintersemester 2018/19'''</big>
* Einführung in die Programmierung künstlicher Intelligenzen (Trogemann, Heck)
* Re-Cycle? (Friedrich)
</div>
</div>
----

<br>

==Help==

----
<div class="row">
<div class="large-4 columns">
<big>'''File-Sharing'''</big>
* [https://wolke.khm.de KHM-Cloud]
*HowTo: [[KHM-Cloud|KHM Cloud einrichten]]
</div>
<div class="large-4 columns">
<big>'''Kalender'''</big>
* '''[https://wolke.khm.de/index.php/apps/calendar/p/dX3fP9xjTBiHDDEX/exMedia_Lab exMedia_Lab Kalender]'''
* '''[https://wolke.khm.de/index.php/apps/calendar/p/n6a59z9AnKKnFgTz/exLabIII exLabIII Kalender]'''
</div>
<div class="large-4 columns">
<big>'''exMediaWiki editieren'''</big>
* HowTo [[EXMEDIAWIKI-HOWTO|EXMEDIAWIKI-HOWTO]]
<br>
</div>

<div class="large-4 columns">
<big>'''KHM-Videokonferenz Plattformen'''</big>
{| class="wikitable"
|-
| [[Zoom-via-browser|Zoom]] || [[DFNconf-Anleitung|DFNconf]]
|-
| [[Big Blue Button]] || [[Jitsi Meet]]
|}
</div>
</div>
</div>

</span>

Datei:Organisch1 19 1.jpg

2026-03-24T11:36:53Z

Christopher.theophanous:

Datei:Test dark background2.jpg

2026-02-02T13:03:21Z

Christopher.theophanous:

Datei:Test bright background.jpg

2026-02-02T12:51:11Z

Christopher.theophanous:

Datei:Test dark background.jpg

2026-02-02T12:48:02Z

Christopher.theophanous:

Datei:Organisch1 20.jpg

2026-01-26T19:09:55Z

Christopher.theophanous:

Datei:Organisch1 18-3.jpg

2026-01-26T18:45:04Z

Christopher.theophanous:

Datei:Organisch1 18-2.jpg

2026-01-26T18:44:52Z

Christopher.theophanous:

Datei:Organisch1 18-1.jpg

2026-01-26T18:44:35Z

Christopher.theophanous:

Datei:Organisch1 17.jpg

2026-01-26T18:44:13Z

Christopher.theophanous:

Datei:Organisch1 16.jpg

2026-01-26T18:43:39Z

Christopher.theophanous:

Datei:Organisch1 15.jpg

2026-01-26T18:42:46Z

Christopher.theophanous:

Datei:Organisch4 1-10.jpg

2026-01-26T16:16:14Z

Christopher.theophanous:

Datei:Organisch4 1-9.jpg

2026-01-26T16:15:44Z

Christopher.theophanous:

Datei:Organisch4 1-8.jpg

2026-01-26T16:15:30Z

Christopher.theophanous:

Datei:Organisch4 1-7.jpg

2026-01-26T16:15:14Z

Christopher.theophanous:

Datei:Organisch4 1-6.jpg

2026-01-26T16:14:55Z

Christopher.theophanous:

Datei:Organisch4 1-5.jpg

2026-01-26T16:14:41Z

Christopher.theophanous:

Datei:Organisch4 1-4.jpg

2026-01-26T16:14:22Z

Christopher.theophanous:

Datei:Organisch4 1-3.jpg

2026-01-26T16:12:05Z

Christopher.theophanous:

Datei:Organisch4 1-2.jpg

2026-01-26T16:11:48Z

Christopher.theophanous: