Snapmaker@lab: Unterschied zwischen den Versionen
Aus exmediawiki
Theo (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „ __INHALTSVERZEICHNIS__ == Snapmaker@lab == The Snapmaker A350DET combines 3D printing, laser engraving, and CNC milling capabilities, allowing you to switc…“) |
Theo (Diskussion | Beiträge) |
||
| Zeile 16: | Zeile 16: | ||
* '''Working Area:''' 320 x 350 x 330 mm | * '''Working Area:''' 320 x 350 x 330 mm | ||
* '''Software Support:''' Compatible with popular slicer software like Snapmaker Luban, Cura, and others. | * '''Software Support:''' Compatible with popular slicer software like Snapmaker Luban, Cura, and others. | ||
| − | |||
<br> | <br> | ||
| Zeile 23: | Zeile 22: | ||
* '''Laser Power:''' Equipped with a 10W high-power laser module, capable of engraving and cutting various materials like wood, leather, acrylic, paper, and more. | * '''Laser Power:''' Equipped with a 10W high-power laser module, capable of engraving and cutting various materials like wood, leather, acrylic, paper, and more. | ||
* '''Working Area:''' 320 x 350 mm | * '''Working Area:''' 320 x 350 mm | ||
| − | |||
<br> | <br> | ||
| Zeile 31: | Zeile 29: | ||
* '''Working Area:''' 320 x 350 mm | * '''Working Area:''' 320 x 350 mm | ||
* '''Tool Compatibility:''' Supports a range of bits for different milling operations (e.g. small V-Bits for milling PCB’s). | * '''Tool Compatibility:''' Supports a range of bits for different milling operations (e.g. small V-Bits for milling PCB’s). | ||
| + | <br> | ||
| + | <br> | ||
| + | |||
| + | ==General Safety Precautions== | ||
| + | |||
| + | * '''Level and Stable Surface:''' Always operate the Snapmaker A350DET on a level, stable work surface to prevent movement or instability. | ||
| + | * '''Use Protective Housing:''' Ensure that the protective housing is used for all operating modes to ensure user safety. | ||
| + | * '''Do Not Leave Unattended:''' Never leave the machine unattended during operation to avoid potential accidents or malfunctions. | ||
| + | * '''Maintain a Clean Workstation:''' Keep the workstation clean and organized. | ||
| + | * '''Secure Workpiece:''' Make sure the material you work with is securely clamped in place before starting the milling operation. | ||
| + | <br> | ||
| + | <br> | ||
| + | |||
| + | ==Operating Modes== | ||
| + | |||
| + | ===3D Printing=== | ||
| + | |||
| + | '''1. Prepare the Print Bed:''' | ||
| + | * Level the bed using the auto-leveling feature. | ||
| + | '''2. Load Filament:''' | ||
| + | * Preheat the nozzle to the recommended temperature for your filament. | ||
| + | * Load the filament through the extruder and confirm it extrudes correctly. | ||
| + | '''3. Slice the Model:''' | ||
| + | * Import your 3D model into the slicing software. | ||
| + | * Configure print settings such as layer height, infill, and support structures. | ||
| + | * Export the sliced file to the machine via USB or Wi-Fi. | ||
| + | '''4. Start Printing:''' | ||
| + | * Select the print file on the touchscreen. | ||
| + | * Monitor the initial layers to ensure proper adhesion and adjust settings if necessary. | ||
| + | '''5. Post-Processing:''' | ||
| + | * Remove the finished print carefully from the bed. | ||
| + | * Clean up any support structures or rough edges if needed. | ||
Version vom 13. August 2024, 17:26 Uhr
Inhaltsverzeichnis
Snapmaker@lab
The Snapmaker A350DET combines 3D printing, laser engraving, and CNC milling capabilities, allowing you to switch between different modes quickly. This page provides an overview of its possibilities and a rough outline of the different approaches to using the machine. Additionaly, there is an official Quickstart Guide as printed version available.
Overview of Possibilities
3D Printing
- Material Compatibility: The Snapmaker A350DET supports a wide range of materials, including PLA, ABS, TPU, and more.
- Working Area: 320 x 350 x 330 mm
- Software Support: Compatible with popular slicer software like Snapmaker Luban, Cura, and others.
Laser Cutting/Engraving
- Laser Power: Equipped with a 10W high-power laser module, capable of engraving and cutting various materials like wood, leather, acrylic, paper, and more.
- Working Area: 320 x 350 mm
CNC Milling
- Material Compatibility: Works with materials such as wood, acrylic, PCB, carbon fiber sheets, and soft metals like aluminum.
- Working Area: 320 x 350 mm
- Tool Compatibility: Supports a range of bits for different milling operations (e.g. small V-Bits for milling PCB’s).
General Safety Precautions
- Level and Stable Surface: Always operate the Snapmaker A350DET on a level, stable work surface to prevent movement or instability.
- Use Protective Housing: Ensure that the protective housing is used for all operating modes to ensure user safety.
- Do Not Leave Unattended: Never leave the machine unattended during operation to avoid potential accidents or malfunctions.
- Maintain a Clean Workstation: Keep the workstation clean and organized.
- Secure Workpiece: Make sure the material you work with is securely clamped in place before starting the milling operation.
Operating Modes
3D Printing
1. Prepare the Print Bed:
- Level the bed using the auto-leveling feature.
2. Load Filament:
- Preheat the nozzle to the recommended temperature for your filament.
- Load the filament through the extruder and confirm it extrudes correctly.
3. Slice the Model:
- Import your 3D model into the slicing software.
- Configure print settings such as layer height, infill, and support structures.
- Export the sliced file to the machine via USB or Wi-Fi.
4. Start Printing:
- Select the print file on the touchscreen.
- Monitor the initial layers to ensure proper adhesion and adjust settings if necessary.
5. Post-Processing:
- Remove the finished print carefully from the bed.
- Clean up any support structures or rough edges if needed.