Snapmaker@lab

Snapmaker@lab

The Snapmaker A350DET combines 3D printing, laser engraving, and CNC milling capabilities, allowing you to switch between different modes quickly. This page provides an overview of its possibilities and a rough outline of the different approaches to using the machine. Additionaly, there is an official Quickstart Guide as printed version available.

Overview of Possibilities

3D Printing

• Material Compatibility: The Snapmaker A350DET supports a wide range of materials, including PLA, ABS, TPU, and more.
• Working Area: 320 x 350 x 330 mm
• Software Support: Compatible with popular slicer software like Snapmaker Luban, Cura, and others.

Laser Cutting/Engraving

• Laser Power: Equipped with a 10W high-power laser module, capable of engraving and cutting various materials like wood, leather, acrylic, paper, and more.
• Working Area: 320 x 350 mm

CNC Milling

• Material Compatibility: Works with materials such as wood, acrylic, PCB, carbon fiber sheets, and soft metals like aluminum.
• Working Area: 320 x 350 mm
• Tool Compatibility: Supports a range of bits for different milling operations (e.g. small V-Bits for milling PCB’s).

General Safety Precautions

• Level and Stable Surface: Always operate the Snapmaker A350DET on a level, stable work surface to prevent movement or instability.
• Use Protective Housing: Ensure that the protective housing is used for all operating modes to ensure user safety.
• Do Not Leave Unattended: Never leave the machine unattended during operation to avoid potential accidents or malfunctions.
• Maintain a Clean Workstation: Keep the workstation clean and organized.
• Secure Workpiece: Make sure the material you work with is securely clamped in place before starting the milling operation.

Operating Modes

3D Printing

1. Prepare the Print Bed:
   • Level the bed using the auto-leveling feature.
2. Load Filament:
   • Preheat the nozzle to the recommended temperature for your filament.
   • Load the filament through the extruder and confirm it extrudes correctly.
3. Slice the Model:
   • Import your 3D model into the slicing software.
   • Configure print settings such as layer height, infill, and support structures.
   • Export the sliced file to the machine via USB or Wi-Fi.
4. Start Printing:
   • Select the print file on the touchscreen.
   • Monitor the initial layers to ensure proper adhesion and adjust settings if necessary.
5. Post-Processing:
   • Remove the finished print carefully from the bed.
   • Clean up any support structures or rough edges if needed.

Laser Cutting/Engraving

1. Material Preparation:
   • Secure the material onto the laser work area.
   • Ensure the material is compatible with the laser power settings.
2. Configure Laser Settings:
   • Import your design file into Snapmaker Luban.
   • Set the appropriate laser power, speed, and number of passes based on the material.
3. Focus the Laser:
   • Adjust the laser module height for optimal focus using the focusing tool provided.
4. Start Engraving/Cutting:
   • Begin the operation from the touchscreen interface.
   • Monitor the process, especially for materials prone to burning.
5. Post-Processing:
   • Clean the engraved or cut piece.
   • Apply finishing touches as needed.

CNC Milling

1. Material and Tool Preparation:
   • Secure the workpiece on the CNC bed using clamps or double-sided tape.
   • Select and install the appropriate milling bit.
2. Configure Milling Settings:
   • Import your design file into Snapmaker Luban.
   • Set parameters such as spindle speed, cutting depth, and feed rate.
3. Zero the Machine:
   • Use the touchscreen to set the X, Y, and Z origins for the job.
4. Start Milling:
   • Begin the milling operation and closely monitor for any tool or material issues.
5. Post-Processing:
   • Remove the finished piece.