Aktionen

Risograph@lab

Aus exmediawiki

overview page machines and technologies@lab

Risograph @ Lab

Risograph is a brand of digital duplicators manufactured by the Riso Kagaku Corporation, that are designed mainly for high-volume photocopying and printing. It was released in Japan in 1980. The RISOGRAPH is a stencil printing style digital duplicator. It works by piercing a printing stencil plate with holes and passing ink through the holes to transfer an image onto paper. Due to working with vegetable based ink and organic based master, large-volume printing with less power consumption than e.g. off set, printing with the risograph is environmentally considerate.

-- https://en.wikipedia.org/wiki/Risograph

Materials and ink

  • paper: from 60 gr. to max. 300 gr. The paper should be uncoated, eg Munken Print. (We have paper available for first testing.)
  • ink: vegetable based mark (rice bran oil ink for black, vegetable oil ink for colours)
  • master: rice based paper
  • available colours at our lab: two shades of blue, yellow, dark green, fluorescent/ neon pink, flat gold, black:


Colors riso lab.png

Getting started

The following is to explain the general riso printing process and to jog your memory.

First there will be an introduction by me (Karin) and discussion of your project in advance to clear up questions, what preparations are necessary and what kind of riso prints would be the most suitable for your idea.

Preparing images

some basics: basic print setup

Printing

  1. switch the printer on
  2. open the tray and the feeder
  3. type passcode: 1914
  4. start with "MasterMake"
  5. feed paper: it's always better to set an excess amount of paper - if there is only a few sheets remaining, often paper jam happens
  6. set ink cartridge (there are pink, blue, medium blue, green, yellow, gold and black)
  7. turn on the PC
  8. transfer data using Wolke (private window recommended) or USB stick
  9. lazy way
    1. print from the browser
    2. set to no frame, and adjust the magnification to fit the paper
    3. print
  10. proper way
    1. open the paper in acrobat etc
    2. press print settings (Einstellungen)
    3. ...
  11. on the printer, press Pause
  12. press Output. It will start making a "master", and print 2 sheets
  13. use the keypad to set the quantity and print

Cleaning

...
generally after your printing process: with a soft tissue/ cloth and some water, clean residue at the machine
during the process: if necessary, the roll at the paper feeder must be cleaned carefully with a damp cloth to avoid ink abrasion on subsequent paper

Tips and Sources


  • very detailed informations can be found at exploriso




to be continued

Working with Processing

...following later...

see also material & process-links (coming soon)

Contact


in case of questions/ if you would like to discuss a project/ get an introduction to the risograph, write to Karin:





Back to Exmedia Wiki